Distributors & Wholesalers of Quality Fabrication Equipment

Looking for a specific product?
[et_pb_ecwid admin_label=”Ecwid”]

VH-25 Vertical / Horizontal Milling Machine

SKU VH-25 Vertical / Horizontal Milling Machine
In stock
Product Details
VH-25 Vertical / Horizontal Milling Machine

A versatile model with two machines in one design, offering Vertical and Horizontal milling operations in one set-up. Changer over from one operation to the other is quick and simple. All it takes is the swing over of the overarm and repositioning of the locating pins.


Separate motors drive the vertical spindle and the horizontal spindle.

4 H.P. Variable Speed Drive on the vertical with #40 taper spindle.

5 H.P. Gear Head Drive on the Horizontal with #40 taper spindle.

10x 56" Table, 16-1/2" x 36" Travel.

The Vertical Milling Head can tilt 4 ways for better milling versatility.

Built-in Gar box power feed of the table that offers 12 different feed rates and rapid traverse for easy positioning.

Double Box Ways on Knee, Hardened & Ground for maximum rigidity at the movement of the table.

Turcite coated Saddle Ways, to retain lube oil and resist long lasting wear.

Box Type Column Ways, Hardened and Ground for maximum rigidity.

Knee movement is equipped with rapid traverse feature for easy elevation of heavy work piece.

Swing arm type pendant control allow easy access to all control knobs and switches.

Meehanite castings are used for superior vibration dampening characteristics.

Working surface 10 x 56
Longitudinal travel, cross travel 36, 16-1/2
Longitudinal feeds (12) 7/8-27 ipm
Longitudinal rapid traverse 82-1/2 ipm
Vertical knee travel, ram travel 17-1/2, 18-1/2
Spindle motor (vertical) 4 HP
Spindle motor (horizontal) 5 HP
Vertical spindle speeds (inf. Var.) 60-4,500 RPM
Spindle speeds (horizontal) (6) 80,120,230,380,700,1350 RPM
Spindle taper , vertical NST #40
Spindle taper, horizontal NST #40
Power quill feeds (3) 0.0016, 0.003, 0.006 ipm
Quill travel 5
Quill diameter 3-1/2
Turret swivel 360
Head tilt, front and back 45
Head tilt left and right 90
Spindle center to column (min-max) 12-13/16 30-11/16
Spindle nose to table (min-max) 5-5/16 23
Spindle center to table (min-max) 0 17-3/8
Spindle center to bottom of overarm 5-1/2
Spindle to nose column 15/16
Wiring voltage 220V/3/60
Net weight 4,200 LBS
Machine dimensions (L x W x H) 82 x 75 x 93

Flood coolant
Longitudinal table powerfeed with rapid traverse
Splash pan
Rapid knee traverse
Rubber way cover-rear
1" Diameter, horizontal arbor with (2) arbor supports

Power draw bar
Power cross feed
Digital readout system
Save this product for later